PEM Electrolyser – PSM Series

2,020 Nm³/h | 4,300 kg/day

The PSM is a proton exchange membrane (PEM) based water electrolyser module that integrates eight 1.25 MW cell stacks to generate hydrogen from deionized (DI) water and four DC electrical power inputs. The PSM includes the PEM cell stacks, associated piping, DC power connections, and related critical monitoring instrumentation. 

The PSM employs a modular approach to hydrogen production designed to offer guaranteed, repeatable performance per module to provide a cost-effective solution for hydrogen production at all scales. 

  Plug and play containerized electrolyser stack module for easy plant integration

  Site ready design eliminates the need for a building and reduces construction cost

  Pre-integrated stacks reduce installation time and risk 

  Instrumentation for critical process and safety monitoring included in package

  Assembled and pre-tested at factory to assure quality control

Features

  • Assembled and pre-tested at factory
  • Cold start less than 5 minutes
  • Full ramp up/ramp down in seconds
  • Indoor or outdoor options
  • Instantaneous response to variable requirements
  • Instrumentation for critical process and safety monitoring
  • Minimum maintenance
  • Plug and play
  • Pre-integrated stacks
  • Remote monitoring and control
  • Site ready design

Applications

  • Ammonia Production
  • Annealing
  • Autoconsumption
  • Biofuel Production
  • Biogas/Biomethane Production
  • Biomethanol Production
  • Blast Furnace Injection
  • Carbon Capture
  • Catalytic Atmosphere
  • Chemical Feedstock
  • Combustion
  • Cylinder/Tube Truck Filling
  • Desulfurization
  • Direct Gas Injection
  • Direct Reduced Iron
  • Energy Storage
  • Extreme Ultravolite Lithography
  • Fertilizer Production
  • Float/Flat Glass Production
  • Fuel for Fuel Cells
  • Fuel for Hydrogen Internal Combustion Engines (HICE)
  • Fuel for Turbines
  • Grid Stabilization
  • Heat Treating
  • Hydrogenation
  • Methanol Production
  • Powder Metallurgy
  • Powder Processing
  • Protective Atmosphere
  • Sintering
  • Space Heating
  • Waste to Synthetic Fuels

Resources

Alkaline and PEM Electrolysers

PSM Series Proton Exchange Membrane Electrolyser Stack Module

Electrolysers for High Purity Industrial Applications

Key features

Specifications

PSM Proton Exchange Membrane Electrolyser Stack Module
Net Production Rate
  Nm³/h (m³/h @ 0°C, 1 bar)2,020 Nm³/h
  kg/24 h4,300 kg/24 h
Turndown Range10 to 100%
Average Power Consumption at Stack4.5 kWh/Nm³
Purity (with Optional High Purity Dryer)99+%, saturated gas with liquid water
O₂-Content in H₂< 1 ppm v
N₂-Content in H₂< 2 ppm v
Operating Pressure30 barg (435 psig); full differential pressure H₂ over O₂
Dimensions W x D x H13.4 m x 2.4 m x 2.9 m (44 ft x 7.9 ft x 9.5 ft), without vent stack
Ambient Temperature (Low and High Ambient Temperature Options Available)-30 to 50°C (-22 to 122°F)
ElectrolyteProton Exchange Membrane (PEM) – Caustic Free

Related products

PEM Electrolyser – PSM Series

Please fill out the below form to request a quote for our PEM Electrolyser - PSM Series. We aim to get back to you promptly.

Ask an Expert

Have a question about our electrolysers or hydrogen fueling stations? Ask an expert, and we’ll respond as soon as possible, usually within one business day.